• EI
  • Scopus
  • 中国科技期刊卓越行动计划项目资助期刊
  • 北大核心期刊
  • DOAJ
  • EBSCO
  • 中国核心学术期刊RCCSE A+
  • 中国精品科技期刊
  • JST China
  • FSTA
  • 中国农林核心期刊
  • 中国科技核心期刊CSTPCD
  • CA
  • WJCI
  • 食品科学与工程领域高质量科技期刊分级目录第一方阵T1
中国精品科技期刊2020
李鑫, 刘锐, 张民, 王跃猛. 澄清型黑蒜饮料的流变特性研究[J]. 华体会体育, 2015, (07): 132-134. DOI: 10.13386/j.issn1002-0306.2015.07.019
引用本文: 李鑫, 刘锐, 张民, 王跃猛. 澄清型黑蒜饮料的流变特性研究[J]. 华体会体育, 2015, (07): 132-134. DOI: 10.13386/j.issn1002-0306.2015.07.019
LI Xin, LIU Rui, ZHANG Min, WANG Yue-meng. Study on rheological properties of the clarified black garlic beverage[J]. Science and Technology of Food Industry, 2015, (07): 132-134. DOI: 10.13386/j.issn1002-0306.2015.07.019
Citation: LI Xin, LIU Rui, ZHANG Min, WANG Yue-meng. Study on rheological properties of the clarified black garlic beverage[J]. Science and Technology of Food Industry, 2015, (07): 132-134. DOI: 10.13386/j.issn1002-0306.2015.07.019

澄清型黑蒜饮料的流变特性研究

Study on rheological properties of the clarified black garlic beverage

  • 摘要: 本文通过采用DV-Ⅲ+型数字流变仪测定了不同温度条件下澄清型黑蒜饮料的流变特性。通过对拟合方程和所得参数的研究发现,在25、35、45℃的温度条件下,黑蒜饮料的流变曲线为一条过原点的直线,对曲线的拟合参数n值接近1,近似为牛顿流体类型;而在55℃和65℃的温度条件下,黑蒜饮料的流变曲线为一条过原点向下凹的曲线,对曲线的拟合参数n值大于1,符合胀塑性流体类型的特征。同时,在不同温度下测定了黑蒜饮料黏度的变化,通过Arrehenius方程η=K0exp(Ea/RT)相关变化进行拟合,可用来预测实际加工过程中澄清型黑蒜饮料温度对黏度的影响,为其加工生产提供理论指导。 

     

    Abstract: DV-Ⅲ + type rheometer was used to study the rheological characteristics of clarified black garlic beverage at different temperatures( 25,35,45,55℃ and 65℃) in this article. The results showed that rheological curves of black garlic beverage were straight lines through the origin at 25,35℃ and 45℃ and fitting parameter n was approximately equal to 1.While the rheological curves were concave downward curves through the origin at55℃ and 65℃ and fitting parameter n was greater than 1.The results showed that the black garlic beverage belongs to Newtonian fluid at 25 to 45 degrees Celsius and dilatant fluid at 55 and 65 degrees Celsius.At the same time,the changes of viscosity of clarified black garlic beverage at different temperatures can be used to predict the actual manufacturing process and provide theoretical guidance according to the outcomes of fitting of η =K0exp( Ea/RT).

     

/

返回文章
返回