• EI
  • Scopus
  • 中国科技期刊卓越行动计划项目资助期刊
  • 北大核心期刊
  • DOAJ
  • EBSCO
  • 中国核心学术期刊RCCSE A+
  • 中国精品科技期刊
  • JST China
  • FSTA
  • 中国农林核心期刊
  • 中国科技核心期刊CSTPCD
  • CA
  • WJCI
  • 食品科学与工程领域高质量科技期刊分级目录第一方阵T1
中国精品科技期刊2020
王莉莉, 曹慧, 徐斐, 晏绍庆. 抗盐酸克伦特罗单克隆抗体的固定化及稳定性研究[J]. 华体会体育, 2014, (07): 144-148. DOI: 10.13386/j.issn1002-0306.2014.07.003
引用本文: 王莉莉, 曹慧, 徐斐, 晏绍庆. 抗盐酸克伦特罗单克隆抗体的固定化及稳定性研究[J]. 华体会体育, 2014, (07): 144-148. DOI: 10.13386/j.issn1002-0306.2014.07.003
WANG Li-li, CAO Hui, XU Fei, YAN Shao-qing. Immobilization and stability study of monoclonal antibody against clenbuterol[J]. Science and Technology of Food Industry, 2014, (07): 144-148. DOI: 10.13386/j.issn1002-0306.2014.07.003
Citation: WANG Li-li, CAO Hui, XU Fei, YAN Shao-qing. Immobilization and stability study of monoclonal antibody against clenbuterol[J]. Science and Technology of Food Industry, 2014, (07): 144-148. DOI: 10.13386/j.issn1002-0306.2014.07.003

抗盐酸克伦特罗单克隆抗体的固定化及稳定性研究

Immobilization and stability study of monoclonal antibody against clenbuterol

  • 摘要: 采用双水相法纯化抗克伦特罗单克隆抗体(CLMcAb),并以其与酶标二抗的亲和力为指标,对CLMcAb的固定化工艺进行研究。在此基础上,通过耐冲刷实验及原子力显微镜(AFM)来表征固定化CLMcAb的稳定性。结果表明:当固定时间90min,CLMcAb稀释倍数2000倍,料液比0.65mL/颗,固定温度4℃时,固定化CLMcAb所表现出的活力最高,即OD值为1.43。纯化介质聚乙二醇(PEG)可通过在载体表面形成均匀紧密的网条结构,并降低其表面粗糙度(Ra)来提高固定化CLMcAb的稳定性。 

     

    Abstract: The anti-clenbuterol monoclonal antibody ( CLMcAb) was purified by the aqueous two-phase systems ( ATPS) , and its affinity with the second enzyme-labeled antibody was taken as evaluation indexes to optimize the immobilized process for CLMcAb. Furthermore, the stability of immobilized CLMcAb could be characterized by resist erode test and atomic force microscope ( AFM) . The results suggested that the optimum CLMcAb activity could be obtained with the fixed time of 90min, the 2000 fold dilution of CLMcAb and the ratio of solid to liquid of 0.65mL per carrier at 4℃.The immobilization of CLMcAb in PEG phase resulted in the highest activity and stability by reducing the surface roughness ( Ra) significantly and forming network micelle on the carrier surface.

     

/

返回文章
返回