• EI
  • Scopus
  • 中国科技期刊卓越行动计划项目资助期刊
  • 北大核心期刊
  • DOAJ
  • EBSCO
  • 中国核心学术期刊RCCSE A+
  • 中国精品科技期刊
  • JST China
  • FSTA
  • 中国农林核心期刊
  • 中国科技核心期刊CSTPCD
  • CA
  • WJCI
  • 食品科学与工程领域高质量科技期刊分级目录第一方阵T1
中国精品科技期刊2020
邹强, 梁华忠, 龚雷淋, 刘达玉, 王卫, 李翔. 益生菌微胶囊二次包衣工艺的优化[J]. 华体会体育, 2013, (22): 250-252. DOI: 10.13386/j.issn1002-0306.2013.22.076
引用本文: 邹强, 梁华忠, 龚雷淋, 刘达玉, 王卫, 李翔. 益生菌微胶囊二次包衣工艺的优化[J]. 华体会体育, 2013, (22): 250-252. DOI: 10.13386/j.issn1002-0306.2013.22.076
ZOU Qiang, LIANG Hua-zhong, GONG Lei-lin, LIU Da-yu, WANG Wei, LI Xiang. Optimization of preparation for double-coated probiotic microcapsules[J]. Science and Technology of Food Industry, 2013, (22): 250-252. DOI: 10.13386/j.issn1002-0306.2013.22.076
Citation: ZOU Qiang, LIANG Hua-zhong, GONG Lei-lin, LIU Da-yu, WANG Wei, LI Xiang. Optimization of preparation for double-coated probiotic microcapsules[J]. Science and Technology of Food Industry, 2013, (22): 250-252. DOI: 10.13386/j.issn1002-0306.2013.22.076

益生菌微胶囊二次包衣工艺的优化

Optimization of preparation for double-coated probiotic microcapsules

  • 摘要: 为了进一步提高蛋白质微胶囊对两歧双歧杆菌(Bifidobacterium bifidum)在人体胃液中的保护效果,以海藻酸钠为壁材对蛋白质微胶囊进行二次包衣。通过考查两歧双歧杆菌在模拟胃液(SGJ)中的存活率和微胶囊粒径,得到了海藻酸钠对蛋白质微胶囊的最佳包衣工艺:海藻酸钠溶液浓度为0.5%,CaCl2浓度为0.05mol/L,pH为5.5,搅拌速度为500r/min。所得微胶囊平均粒径为133μm,它们能将Bifidobacterium bifidum在模拟胃液中2h后的存活率提高至14.5%。 

     

    Abstract: In order to further enhance the protective effect of protein-based microcapsules on Bifidobacterium bifidum in simulated gastric juice, alginate was selected as a double-coating material. It was observed that the optimal coating process condition was obtained by evaluating the particle size of microcapsules and survival rate of microencapsulated Bifidobacterium bifidum in simulated gastric juice, and that the optimal coating process condition was:the concentration of alginate solution 0.5%, the concentration of CaCl20.05mol/L, pH5.5, the agitation rate 500r/min. The particle size of microcapsules was 133μm, and the survival rate of Bifidobacterium bifidum in simulated gastric juice was improved to 14.5% at the optimal coating condition.

     

/

返回文章
返回